Tikka T3x/T1x Performance Kit — LOP Spacer + Cheek Riser Bundle
// Fitment & specsDetails before you buy
Key details on fit, setup and use before you buy.
Three simple steps
Set eye relief first
Confirm scope position before changing stock fit.
Fit the selected LOP option
Use one selected Original or Flat-Recoil spacer as the default setup.
Special-case stack
The rule applies to every LOP spacer: only stack in a special case, glue the spacer pieces together before final installation, and use confirmed locating and fastening hardware.
Fit the cheek riser
Raise the comb until your eye opens naturally behind the scope.
Final check
Stop and contact us if any part does not align or tighten securely.
Common questions
What's included in the Performance Kit?+
The Drop Comb Cheek Riser plus the LOP option you select: the Original LOP Kit or one Flat-Recoil LOP Spacer in 10, 20, or 30 mm.
How do I choose the LOP option?+
Choose Original for standard 10 mm or 20 mm length adjustment. Choose one Flat-Recoil size when pad angle and shoulder contact are also part of the fit problem.
Can I stack LOP spacers?+
For every LOP spacer, use one spacer by default. Stacking any combination of LOP spacers can be done only in special cases, but a multi-piece stack does not create the strongest possible connection and is not our recommended default. If stacking is required, glue the spacer pieces together before final installation and use only the confirmed locating and fastening hardware for the setup. Contact us first if the stacked setup and hardware have not already been confirmed.
Will it fit my rifle?+
It is designed for Tikka T3, T3x, and T1x factory-stock setups. Send us a clear photo before ordering if your stock or recoil pad is not factory.
How long does it take to fit?+
Allow about 20 minutes for many setups. Set eye relief first, fit the LOP option, then set cheek height. Stop and contact us if anything does not align or tighten securely.
Do you ship internationally?+
Yes. Available shipping options and any duties or taxes are shown in cart and checkout before payment.
Full details, specs & FAQ
Cheek height and length of pull are the two fit adjustments most likely to change how naturally a scoped Tikka mounts. The Nokka Performance Kit pairs the Drop Comb Cheek Riser with the LOP option you choose, at a lower bundle price than buying the selected parts separately.
Choose this kit when your head lifts to find the scope and the stock feels short or cramped after eye relief is set. If only one issue shows up, buy that part on its own.
Choose your LOP option
- Original LOP Kit: choose one supplied 10 mm or 20 mm spacer as the default setup.
- Flat-Recoil LOP Spacer: choose one 10 mm, 20 mm, or 30 mm size as the default setup when pad angle and shoulder contact are part of the fit problem.
Stacking rule for every LOP spacer: For every LOP spacer, use one spacer by default. Stacking any combination of LOP spacers can be done only in special cases, but a multi-piece stack does not create the strongest possible connection and is not our recommended default. If stacking is required, glue the spacer pieces together before final installation and use only the confirmed locating and fastening hardware for the setup. Contact us first if the stacked setup and hardware have not already been confirmed.
What's included
- Drop Comb Cheek Riser
- Your selected Original LOP Kit or Flat-Recoil LOP Spacer
- Note: adhesive for mounting the cheek riser (superglue or double-sided tape) is not included — see the attachment question below
Compatibility
Designed for Tikka T3, T3x, and T1x factory-stock setups. Aftermarket stocks and recoil pads vary; send us a clear photo before ordering and we will confirm the fit path.
Shooting a T3x ACE or a UPR? This bundle is built around the factory-stock parts. The T3x ACE Target, T3x ACE Game, T3x UPR and T1x UPR use a different buttstock geometry and mounting pattern, so the LOP spacer in this kit is not the right part for them — set length of pull with the ACE and UPR length of pull kit instead.
- Installation: no drilling or permanent stock modification — the cheek riser attaches with superglue or double-sided tape (not included)
- Made in Australia
Use the Tikka fit checklist before ordering if you are not sure whether the issue is eye relief, cheek height, or stock length.
A note on manufacturing
Nokka parts are precision 3D printed in Australia. As with any 3D-printed part, small cosmetic variations — faint layer lines or slight surface-texture differences between batches — can occur. These are normal for the process and do not affect fit or function.
Common questions
Original LOP Kit or Flat-Recoil?
Choose Original when you need standard 10 mm or 20 mm length adjustment. Choose Flat-Recoil when you also want to change pad angle and shoulder contact, selecting one 10 mm, 20 mm, or 30 mm spacer as the default setup.
Can I stack LOP spacers?
For every LOP spacer, use one spacer by default. Stacking any combination of LOP spacers can be done only in special cases, but a multi-piece stack does not create the strongest possible connection and is not our recommended default. If stacking is required, glue the spacer pieces together before final installation and use only the confirmed locating and fastening hardware for the setup. Contact us first if the stacked setup and hardware have not already been confirmed.
How does the cheek riser attach — is adhesive included?
The cheek riser fixes to the comb of the stock with superglue or double-sided tape. Adhesive is not included in the kit — we're unable to ship it with the parts — so grab either from any hardware store or supermarket. We personally use superglue: as funny as it sounds, it works really well and can be removed later if needed. If you prefer tape, choose one rated as removable, because some heavy-duty double-sided tapes are very hard to get off. We deliberately avoided a screw fit — everyone's ideal riser position is slightly different, and nobody wants multiple holes drilled in an OEM stock.
Will both parts fit my rifle?
They are designed for Tikka T3, T3x, and T1x factory-stock setups. Send us a clear photo before ordering if your stock or recoil pad is not factory.
Does this kit fit a T3x ACE or a UPR?
The LOP spacer in this bundle does not. The ACE and UPR use a different buttstock geometry and mounting pattern, so use the ACE and UPR length of pull kit for the T3x ACE Target, T3x ACE Game, T3x UPR and T1x UPR. If you are unsure which stock you have, send us a photo and we will confirm the fit path.
How long does installation take?
Allow about 20 minutes for many setups. Set eye relief first, fit the LOP option, then set cheek height. Stop and contact us if any part does not align or tighten securely.
Do you ship internationally?
Yes. Available shipping options and any duties or taxes are shown in cart and checkout before payment.
Complete the setup
