// Precision fit for Tikka T3 · T3x · T1x

Make your Tikka fit you.

Your rifle is already accurate. The weak link is the fit — and that's the gap Nokka closes. Cheek risers and stock spacers engineered to Tikka's exact tolerances.

Tikka T3x bolt-action rifle with Nokka Tactical cheek riser and LOP spacer kit installed — set up for precision shooting
Material
PETG — built tough where it matters

Fitment
Tikka T3 · T3x · T1x OEM stocks

Design
Designed in Finland · built in Australia
Engineered for Tikka not "universal" generic
Scandinavian design designed in Finland
30-day fit guarantee doesn't fit? send it back
Free AU shipping $75+ $20 flat worldwide
// The problem nobody talks about

Factory stocks are built for the average shooter. You're not average.

Tikka combs sit low for iron sights. Mount a scope and your eye floats above the comb — you lift your head to find the reticle and lose your cheek weld. Head position shifts shot to shot, and your groups open up for reasons that have nothing to do with the rifle.

01
Lost cheek weldComb too low for scoped optics
02
Wrong length of pullStock built for a light-jacket European frame
03
Heavy factory triggerShips at 3.5–4 lb — heavier than precision work wants
Cheek weld comparison on a Tikka T3x: top, without a cheek riser the shooter's head is craned down to the low comb; bottom, with the Nokka drop-comb cheek riser the eye sits naturally aligned with the scope.

Parts engineered to fit, not to "fit most"

Four upgrades that solve real fit problems — designed and tested on both T3x and T1x.

Tikka drop-comb cheek riser fitted on a black T3x stock
Drop Comb Cheek Riser
Adjustable drop-comb rest that raises your comb to meet the scope and holds under recoil. Fits T3 / T3x / T1x OEM stocks.
$49.00
Nokka LOP spacer kit in black PETG — adapter plate, spacers and recoil-pad screws
LOP Spacer Kit
Adapter plate + 10mm and 20mm spacers stack for up to 30mm of length-of-pull adjustment. Bolt-on, fully reversible — works with OEM and Limbsaver pads.
$39.00View →
Crisp Tikka T3x trigger pull with the Nokka trigger spring fitted
Trigger Spring
Drop-in spring that takes your factory trigger down to a crisp ~2 lb pull — no gunsmith, fully reversible. Fits T3 / T3x / T1x.
$25.00
Save 15%Nokka Performance Kit — cheek riser and LOP spacer fitted on a Tikka stock
Performance Kit
Cheek riser + LOP spacer kit, designed to work as a system. The fastest full ergonomic overhaul for a scoped Tikka — and it clears free AU shipping.
$79.00
Nokka Tactical founder behind a scoped Tikka with the drop-comb cheek riser fitted
// Why Nokka exists

"I'm Finnish. A Tikka isn't a choice for us — it's just what we use. When I ran out of good accessories for mine, I started making my own."

In Finnish, nokka means beak — the sharp, precise point of something. The right name for a company built on one obsession: making Tikka rifles fit their owners perfectly.

The Tikka aftermarket is almost entirely US-centric — American dimensions, American shipping times and costs. So I built a complete system of precision ergonomic parts, engineered to Tikka's exact tolerances, that lets any shooter find their fit without turning their rifle into something it isn't.

We shoot what we sell. The gap between your eye and your scope shouldn't cost you the shot.

Designed in Finland · built in Australia
// founder, Nokka Tactical
Negative comb angle cheek riser reducing felt recoil on Tikka rifle
// How it's made

Built to a tolerance, not a price point

Generic accessories chase broad compatibility and compromise everywhere. Ours are dimensioned to the Tikka stock — so they sit flush, blend in, and hold zero of attention until you shoulder the rifle.

Body
PETG — built tough where it matters, light where it counts
Design
Designed in Finland, built in Australia
Fitment
Tikka T3 · T3x · T1x OEM stocks
Install
Bolt-on, fully reversible — no permanent mods
Profile
Low-profile — blends with the rifle, doesn't shout
Nokka Performance Kit — cheek riser and LOP spacer fitted on a Tikka stock
// Best value · most popular

The Performance Kit

Cheek height and length of pull work together — adjust one and the other usually needs tuning too. The kit bundles both so they're set up as a system, at a price that beats buying separately.

1× Drop Comb Cheek Riser1× LOP Spacer Kit30-day fit guarantee
$79.00Save 15%

What shooters say

Real owners, real rifles.

★★★★★

Cheek weld is finally consistent. Fitted in five minutes and it doesn't budge under recoil. Looks like it came on the rifle.

// verified buyer · T3x 6.5CM
★★★★★

The LOP kit fixed a stock that always felt a touch long in winter kit. Simple, solid, fits the Limbsaver pad perfectly.

// verified buyer · T3x .308
★★★★★

Bought the Performance Kit. Best money I've spent on the rifle — should've done it years ago. The guides made setup obvious.

// verified buyer · T1x .22LR
// 30-day fit guarantee

If it doesn't fit, send it back.

We engineer to OEM tolerances and stand behind it. Fit your Tikka, shoot it, and if it's not right within 30 days we'll make it right.