Tikka T3x Trigger Spring — 2 lb Drop-In, No Gunsmith (fits T1x too)
// Fitment & specsConfirm it fits before you buy
Engineered to Tikka's exact stock tolerances — not a universal part forced to fit.
Three steps, minimal tools
Remove the action
Take the barrelled action out of the stock.
Swap the spring
Replace the factory trigger spring with the Nokka spring.
Reassemble & test
Reinstall, check function, and confirm your pull weight.
Common questions
Will this trigger spring fit my Tikka?+
Yes — it's a direct-swap spring for the factory trigger on Tikka T3, T3x and T1x rifles, both centrefire and rimfire.
What pull weight will I get?+
A crisp ~2 lb pull, down from the 3.5–4.5 lb factory weight — the clean, predictable break precision work actually wants.
Do I need a gunsmith to fit it?+
No. It's a drop-in spring swap: take the barrelled action out of the stock, replace the factory trigger spring with the Nokka spring, then reassemble. A few minutes with basic tools.
Is it reversible?+
Completely. Keep your factory spring and you can return the trigger to its original pull weight any time — no permanent modification.
Is a lighter trigger safe?+
Always function-check after fitting — confirm the trigger resets, the safety engages, and the rifle won't fire on a firm bolt-close before any live fire. Set up correctly it gives a safe, consistent ~2 lb break.
Will it work on both Tikka T3x and T1x?+
Yes — both platforms use the same trigger group geometry, and the spring is a direct drop-in for both.
What pull weight will I end up with?+
The spring plus trigger screw adjustment lets you set the pull down to about 2 lb. Many shooters settle at 2–2.5 lb. The factory Tikka trigger is usually around 4.5 lb.
Do I need to take the entire trigger apart?+
No. The spring is accessed by removing the trigger pin; the trigger group itself stays assembled. About a 10-minute job following the included guide.
Will it void my factory warranty?+
Internal modifications to the trigger group can affect Tikka's factory warranty on the trigger group specifically — the rest of the rifle's warranty isn't affected. Keep your factory spring in case you ever want to revert.
Do you ship internationally?+
Yes — we ship worldwide via Zonos. US, UK, and EU customers see exact landed cost (including duties and taxes) at checkout, with $20 flat international shipping. Australian orders ship free over $75.
Full details, specs & FAQ
The factory Tikka T3x trigger is decent — around 4.5 lb pull weight out of the box. But if you've ever shot a properly tuned 2 lb trigger, you know the difference it makes to precision and confidence on the shot break.
The Nokka Performance Trigger Spring is a direct drop-in Tikka T3x trigger spring — a straight replacement for the factory spring on all Tikka T3x and T1x rifles, no gunsmithing required. It's the simplest, cheapest way to upgrade your Tikka trigger spring. Swap it in 10 minutes, adjust the trigger screw to your preferred weight, and you've got a noticeably crisper, lighter pull that transforms the shooting experience.
What you get
- 1× Performance trigger spring (drop-in replacement)
- Reduces pull weight from ~4.5 lb to ~2 lb (adjustable)
- Installation guide included
Compatibility
- Fits: All Tikka T3x and T1x variants
- Installation: No gunsmith needed — 10-minute swap with basic tools
Why it matters
Trigger pull is the last mechanical input before the shot breaks. A heavy, gritty pull introduces movement at the worst possible moment. A light, clean break lets you send the shot without disturbing your aim. This spring gets you there for a fraction of what a full aftermarket trigger assembly costs.
Made in Australia. 30-day fit guarantee.
Setting up the whole rifle? See our Tikka T3x setup & fit guide — cheek weld, length of pull, trigger and scope.
Common questions
Will it work on both Tikka T3x and T1x?
Yes — both platforms use the same trigger group geometry, and the spring is a direct drop-in for both.
What pull weight will I end up with?
The spring plus trigger screw adjustment lets you set the pull down to about 2 lb. Many shooters settle at 2–2.5 lb. The factory Tikka trigger is usually around 4.5 lb.
Do I need to take the entire trigger apart?
No. The spring is accessed by removing the trigger pin; the trigger group itself stays assembled. About a 10-minute job following the included guide.
Will it void my factory warranty?
Internal modifications to the trigger group can affect Tikka's factory warranty on the trigger group specifically — the rest of the rifle's warranty isn't affected. Keep your factory spring in case you ever want to revert.
Do you ship internationally?
Yes — we ship worldwide via Zonos. US, UK, and EU customers see exact landed cost (including duties and taxes) at checkout, with $20 flat international shipping. Australian orders ship free over $75. See our shipping policy for details.
Complete the setup
